SWD9515 kụrụ n'elu ụlọ mgbọrọgwụ ntupu eguzogide pụrụ iche polyurea waterproof mkpuchi
Njirimara ngwaahịa na uru
* Ihe mgbaze efu, ọdịnaya siri ike 100%, nchekwa, enyi na gburugburu ebe obibi na enweghị isi.
* Ngwọta ngwa ngwa, enwere ike fesa na-akpụ akpụ n'elu ebe ọ bụla gbagoro agbagọ, mkpọda na elu kwụ ọtọ, enweghị mgbagha.
* Mkpuchi mkpuchi, enweghị nkebi, nwere ezigbo mgbanwe.
* Ike nrapado siri ike, njikọta ngwa ngwa nke ọma na igwe, kọnkịta, osisi, eriri iko na ihe ndị ọzọ.
* Nguzogide mmetụta dị oke mma, nguzogide abrasion
* Nguzogide corrosion kacha mma na nguzogide kemịkalụ na acid, alkali, salts wdg.
* Nguzogide ntupu mara mma megide mgbọrọgwụ osisi, nguzogide penetration na mgbochi mmiri
* Ọmarịcha ihe na-adọta ujo
* Nguzogide dị mma maka mgbanwe okpomọkụ
* Ọgwụgwọ ngwa ngwa, saịtị ngwa weghachi ọrụ ngwa ngwa
* Ogologo oge dị oke mma iji belata ọnụ ahịa mmezi nke ndụ ọrụ
* Gbatịa ndụ ọrụ nke ihe owuwu fesa
Ngwa ngwaahịa
Mgbọrọgwụ iguzogide waterproof nchebe nke elu ụlọ ubi, obodo ukwu square na ndị ọzọ kụrụ n'elu ụlọ
Ozi ngwaahịa
| Ihe | A | B
|
| Ọdịdị | Mmiri mmiri na-acha odo odo | Agba na-agbanwe agbanwe |
| Nnukwu ike ndọda (g/m³) | 1.13 | 1.04 |
| Viscosity (cps) @ 25 ℃ | 810 | 670 |
| Ọdịnaya siri ike (%) | 100 | 100 |
| Ngwakọta ọnụ (oke ruru) | 0 | 0 |
| Oge gel (nke abụọ) @ 25 ℃ | 1 | 1 |
| Oge akọrọ (nke abụọ) | 3-5 | |
| Mkpuchi Mkpesa (dft) | 1.02kg / ㎡ ihe nkiri ọkpụrụkpụ: 1mm | |
Njirimara anụ ahụ nke ngwaahịa
| Ihe | Nlele ọkọlọtọ | Nsonaazụ |
| Isi ike (Oké Osimiri A) | ASTM D-2240 | 89 |
| Ọnụọgụ mmụba (%) | ASTM D-412 | 450 |
| Ike tensile (Mpa) | ASTM D-412 | 17 |
| Ike akwa mmiri (N/km) | ASTM D-624 | 65 |
| Enweghi ike (0.3Mpa/30min) | HG/T 3831-2006 | enweghị ike ime ya |
| Yiri nguzogide (750g/500r)/mg | HG/T 3831-2006 | 4.2 |
| Ike nrapado (Mpa) ihe ndabere | HG/T 3831-2006 | 3.4 |
| Nrapado ike (Mpa) ígwè isi | HG/T 3831-2006 | 11 |
| Njupụta (g/cm³) | GB/T 6750-2007 | 1.02 |
| Mgbasa nke Katọlik [1.5v, (65 ± 5) ℃, 48h] | HG/T 3831-2006 | ≤15mm |
Ngwa ndetu
Agitate akụkụ B edo tupu etinyere ya, gwakọta pigmenti echekwara nke ọma, ma ọ bụ ọ ga-emetụta ogo ngwaahịa ahụ.
fesaa polyurea n'ime oge kwesịrị ekwesị ma ọ bụrụ na elu nke mkpụrụ ahụ na-amalite.Maka usoro ngwa na oge etiti oge SWD polyurea speical primer biko rụtụ aka na broshuọ ụlọ ọrụ SWD ndị ọzọ.
Tinye SWD ịgba polyurea mgbe niile na obere mpaghara tupu nnukwu ngwa iji lelee nha ngwakọta, agba na mmetụta ịgba dị mma.Maka ozi zuru ezu nke ngwa biko rụtụ aka na akwụkwọ ntuziaka kacha ọhụrụ nkentuziaka ngwa nke SWD spray polyurea series.
Oge ọgwụgwọ ngwaahịa
| Substrate okpomọkụ | Akọrọ | Okporo ụzọ ụkwụ | Akọrọ siri ike |
| + 10 ℃ | 20s | Nkeji 45 | 7d |
| + 20 ℃ | 15s | Nkeji 15 | 6d |
| + 30 ℃ | 12s | 5min | 5d |
Rịba ama: oge ọgwụgwọ dịgasị iche na ọnọdụ gburugburu ebe obibi karịsịa okpomọkụ na iru mmiri.
Ndụ nchekwa
* Site na ụbọchị onye nrụpụta yana ọnọdụ akara nke mbụ ngwugwu:
A: ọnwa 10
B: ọnwa 10
* nchekwa okpomọkụ: +5-35°C
Nkwakọ ngwaahịa: Akụkụ A 210kg / drum, akụkụ B 200kg / drum
Gbaa mbọ hụ na ejiri mechie ngwugwu ngwaahịa ahụ nke ọma
* Chekwaa n'ebe dị jụụ na ikuku, zere ikpughe anwụ ozugbo.
