SWD9007 okporo ụzọ ọwara pụrụ iche ọkụ retardant polyurea anticorrosion mkpuchi mkpuchi
Njirimara ngwaahịa na uru
* Ihe mgbaze efu, ọdịnaya siri ike 100%, nchekwa, enyi na gburugburu ebe obibi na enweghị isi.
* Ngwọta ngwa ngwa, enwere ike fesa na-akpụ akpụ n'elu ebe ọ bụla gbagoro agbagọ, mkpọda na elu kwụ ọtọ, enweghị mgbagha.
* Mkpuchi mkpuchi, enweghị nkebi, nwere ezigbo mgbanwe
* Ike nrapado dị elu, nwere ike jikọta nke ọma na ọtụtụ mkpụrụ dị ka igwe, kọnkịta, osisi, iko fiber wdg.
* Nguzogide mmetụta dị oke mma, nguzogide abrasion
* Nguzogide corrosion kacha mma na nguzogide kemịkalụ na acid, alkali, salts wdg.
* Ọrụ mgbochi mmiri dị mma
* Ọmarịcha arụmọrụ na-adọta ujo
* Nguzogide dị mma maka mgbanwe okpomọkụ
* Ọgwụgwọ ngwa ngwa, saịtị ngwa weghachi ọrụ ngwa ngwa
* Ogologo oge dị oke mma iji belata ọnụ ahịa mmezi nke ndụ ọrụ
* Gbatịa ndụ ọrụ nke ihe owuwu fesa
Oghere ngwa
Ọkụ na-egbochi mgbochi mgbochi mmiri na-egbochi mmiri nke ụzọ ụgbọ oloko, okporo ụzọ, ụzọ ụgbọ oloko mepere emepe na akụrụngwa njem ndị ọzọ.
Ozi ngwaahịa
Ihe | A | B |
Ọdịdị | Mmiri mmiri na-acha odo odo | Agba na-agbanwe agbanwe |
Nnukwu ike ndọda (g/m³) | 1.12 | 1.22 |
Viscosity (cps) @25 ℃ | 800 | 880 |
Ọdịnaya siri ike (%) | 100 | 100 |
Ngwakọta ngwakọta (site na olu) | 1 | 1 |
Oge gel (nke abụọ) @25℃ | 4-6 | |
Oge ọkọchị nke elu (nke abụọ) | 15-40 | |
Mkpuchi Mkpesa (dft) | 1.08kg/㎡ Ihe nkiri ọkpụrụkpụ 1mm |
Njirimara anụ ahụ
Ihe | Nlele ọkọlọtọ | Nsonaazụ |
Isi ike (Oké Osimiri A) | ASTM D-2240 | 92 |
Ọnụọgụ mmụba (%) | ASTM D-412 | 180 |
Ike tensile (Mpa) | ASTM D-412 | 8 |
Ike akwa mmiri (N/km) | ASTM D-624 | 60 |
Enweghi ike (0.3Mpa/30min) | HG/T 3831-2006 | enweghị ike ime ya |
Enwere ike eyi (750g/500r) / mg | HG/T 3831-2006 | 1.2 |
Ike nrapado (Mpa) ihe ndabere | HG/T 3831-2006 | 3.2 |
Nrapado ike (Mpa) ígwè isi | HG/T 3831-2006 | 11.3 |
Njupụta (g/cm³) | GB/T 6750-2007 | 1.08 |
Mgbasa nke Katọlik [1.5v, (65 ± 5) ℃, 48h] | HG/T 3831-2006 | ≤15mm |
Ihe na-egbochi ọkụ | GB8624-2012 | B1 |
